d-link des-1008d manuale

Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft CorporatSection 1, Introduction - A description of the physical features of the switch, including LED indicators, ports and panel descriptions.Throughout this safety section, the caution icon ( ) is used to indicate cautions and precautions that you need to review and follow. Safety Cautions To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following precautions. ObserThe power cable must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cable should be greater tMake sure that the rack is level and stable before extending a component from the rack. Use caution when pressing the component rail release latches and sliding a component into or out of a rack; the slide rails can pinch your fingers. After a component is inserted into the rack, carefully extend the rail into a locking poAmong them, FastThis allows the total network capacity to be multiplied, while still maintaining the same network cabling and adapter cards. For Fast Ethernet or Gigabit Ethernet networks, a switch is an effective way of eliminating problems of chaining hubs beyond the “two-repeater limit.” A switch can be used to split parts of the network into different collision domains, for example, making it possible to expand your FasThis process is indicated by the Speed LED blinking green for each of the eight ports.If a cable fault is detected, it is indicated by the corresponding port’s Speed LED glowing amber for 5 seconds.The Switch is then reset for normTwo mounting slots are provided on the bottom of the switch for this purpose. Please make sure that the front panel is exposed in order to view the LEDs. Please refer to the illustration below: A.) Mounting on a cement wall 1.

• d-link des-1008d manuale italiano, d-link des-1008d manual, d-link dgs-1008d manual, switch d-link des-1008d manual, d link dgs 1008d manuale italiano, d-link des-1008d manual download, d-link des-1008d user manual, d-link des-1008d manuale.

Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. All Hardware (or part thereof) that is replaced by D - Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Describes the front panel, rear panel and LED indicators of the DES-1008D. Chapter 4, Connecting the DES-1008D. Tells how you can connect the DES-1008D to your Ethernet network. Appendix A, Technical Specifications. Lists the technical (general, physical and environmental, and performance) specifications of the DES-1008D. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. The DES-1008D is a perfect choice for sites planning to upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the. Both the front and rear panels are shown followed by a description of each panel feature. The indicator panel is described in detail in the next chapter. Front Panel The figure below shows the front panel of the DES-1008D. Check the technical specification section for information about the AC power input voltage.Please review these products for matching cable pin assignment. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden.

DC Power Jack. Power is supplied through an external AC. Pagina 13 D-Link DGS-1008D Unmanaged Gigabit Ethernet SwitchMounting the Switch on a WallPagina 15 D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. Provide for Adequate VentilationPagina 16 D-Link DGS-1008D Unmanaged Gigabit Ethernet SwitchConnecting The SwitchSwitch to Hub or Switch. These connections can be accomplished in a number. Pagina 18: (ALL COUNTRIES AND REGIONS EXCLUDING USA) D-Link DGS-1008D Unmanaged Gigabit Ethernet SwitchTechnical SpecificationsStandards: IEEE 802.3ab 1000BASE-TIP address Internet Protocol address. A unique identifier for a device attached to. Pagina 21 D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. VLT Virtual LAN Trunk. A Switch-to-Switch link which carries traffic for all the. Pagina 22 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for. No Cash on Delivery (“COD”) isWichtige SicherheitshinweisePagina 26 Limited Warranty. Hardware. D-Link warrants each of its hardware products to be free from defects in workmanship and materials under. Pagina 27 Offices. Australia D-Link AustraliaPrint, type or use block letters. Your title at. Pagina 32 25.

Mount the Nylon screw anchors into a cement wall. 2. Drive the T3 x 15L screws into the Nylon screw anchors. 3. Hook the mounting holes of In addition, care should be taken not to locate the Switch next to, on top of, or underneath any device that generates a significant amount of heat. For the Switch to performAn end node can be connected to the Switch via a twisted-pair Category 3, 4, or The address is written as four octets separated with full-stops (periods), and is made up of a network section, an optional subnet section and a host section. IPX Internetwork Packet Exchange. A protocol allowing communication in a NetWare network. LAN Local Area Network. A network of connected computing resources (such as PCs, printer. Information in this document is subject to change without notice.Preface. The DGS-1008D User’s Guide is divided into sections that describe the system. Pagina 5: REAR PANEL DESCRIPTION D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. Safety Instructions. Use the following safety guidelines to ensure your own personal safety. Pagina 6: BEFORE YOU CONNECT TO THE NETWORK D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. Safety Instructions (continued). If you have not. Pagina 7: ATTACHING THE RUBBER FEET D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. Safety Instructions (continued). Always load the rack from the bottom up, and load. Pagina 8: Power Failure D-Link DGS-1008D Unmanaged Gigabit Ethernet SwitchEthernet Technology. Pagina 9: SWITCH TO END NODE D-Link DGS-1008D Unmanaged Gigabit Ethernet SwitchThis allows the total network capacity to be. Pagina 10: CONNECTING TO NETWORK BACKBONE OR SERVER D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. Front-Panel Components. Pagina 11: TECHNICAL SPECIFICATIONS D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. The Cable Diagnostic first scans the eight Ethernet ports to determine if the. Pagina 12: GLOSSARY D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch. Rear Panel Description.